Tech Source / Raptor 2100 FPS 2K x 2K monitor and graphics board subsystem for ATC

HOME > Products > ATC Graphics Boards > Raptor 2100 FPS

	Drivers
	Manuals
	Brochures

	FAQs
	Maintenance
	Technical Support
	Discontinued Products

Raptor 2100 FPS

2K x 2K monitor and graphics board subsystem

•	Comprised of LCD monitor and graphics board
•	28.1" LCD monitor
•	2048 × 2048 native resolution
•	225 cd/m² brightness
•	450:1 contrast ratio
•	170° viewing angles
•	Analog and digital inputs
•	MOX-compatible, multilayered display
•	Software configurable

The Tech Source Raptor 2100 FPS is a digital flat panel display subsystem designed for use in high resolution, high performance, color graphics applications such as air traffic management and vessel traffic control. Consisting of a single-slot PCI card and a 28.1" flat panel monitor, it provides a comprehensive array of high-end graphics including 2048 × 2048 resolution, 2560 displayable colors and 32 independently addressable overlays.

The digital flat panel monitor is designed to fit in existing ATC consoles and is 85% lighter, 100% brighter, and consumes 66% less power than current CRT monitors. In addition, it has software-controllable brightness adjustments.

Multiple overlay configuration is supported through the published X Server Extension called MOX (multiple overlay extension). Double buffering is available using standard software interfaces such as MBX multi-buffering extension for X Server) and DBE (double buffering extension). Specialized hardware performs back buffer screen erases at an extremely high speed.

Graphics Board

Frame Buffer Size	64 MB SGRAM
Drawing Processor	Tech Source TROZ ASIC
Color Lookup Tables	Primary color map w/2048 entries and two auxiliary color maps w/256 entries each for blending
Bits Per Pixel	8, 24, 8 + 24 (software configurable)
MOX Modes	MOX 16, MOX 24 and MOX 32
PCI Interface	33/66 MHz, 32/64-bit, Revision 2.2
Video Interface	DVI
Video Connector	One Low Force Helix 60-pin (LFH60) (digital interface)
Temperature Rating	10° to 50°C operating -10° to 70°C non-operating
Humidity Rating	5 to 90% (non-condensing)g)
Power Consumption	Less than 25 W
Approvals	FCC Class A Certified, CE Mark
Physical	312 mm × 107 mm (12.8" × 4.2")

LCD

Panel	Panel Size and Type	71.12 cm (28") TFT color LCD panel
	Viewing Angles (H, V)	170°, 170°
	Brightness / Contrast ratio	225 cd/m² (maximum) 22.5 cd/m² (minimum) / 1000:1 (typical)
	Backlight	3 x CCFT-Trays (Cold Cathode Fluorescent Tube)
	On/Off Response Time	25 ms (typical)
	Native Resolution	2048 × 2048
	Active Display Size (H × V)	503.808 × 503.808 mm
	Viewable Image Size	Diagonal: 711.2 mm (28.05")
	Pixel Pitch	0.246 × 0.246 mm (103 ppi)
	Display Colors	16.7 million
RGB Analog Input Signal	Scanning Frequency (H, V)	30 – 130 KHz, 50 – 70 Hz
	Terminal	BNC × 5
	Level (Video)	0.7 Vss RGB (50 Ω）
	Synchronization	Separate Sync 1-5 Vss (75 Ω）
DVI Input Signals	Type	DVI Standard 1.0 (dual link)
	Terminals	DVI-I 29 pin × 2 (digital)
	Pixel Clock	2 × 165 MHz (maximum)
Power	Power Consumption	110 W – 150 W (typical) at brightness of 70 – 210 cd/m²
Power	Power Save Mode (Standby)	15 W (typical)
Physical Specifications	Dimensions (W × H × D)	Chassis Type: 616 × 613 × 129.5 mm / 24.3 × 24.1 × 5.1" Desktop Type: 671 × 695 × 240 mm / 26.4 × 27.4 × 6.7" Panel Mount Type: 644 × 644 × 130 mm / 25.4 × 25.4 × 5.2"
Environmental Specifications	Operating Temperature	10° to 40° C (50° to 104° F)
	Storage Temperature	-20° to 60° C (4° to 140° F)
	Humidity	max. 95% (no condensation)
Control / Settings		RS232 / RS422 / OSD (on screen display)
Auto Adjustment Functions		Frequency / Phase (analog only), Backlight Stabilization
Certifications and Standards		CE, CB, FCC-B, UL60950-1